Details of gas spring installation

Nitrogen is injected into the gas spring, which produces elastic function through the piston. The product does not require external power when working, the lifting force is stable, and it can be freely extended and contracted (the lockable gas spring can be positioned arbitrarily). Pay attention to the following points:
1. The gas spring piston rod must be installed in the downward position, not upside down, which can reduce friction and ensure the damping quality and cushioning performance of the piston.
2. Deciding the installation position of the fulcrum is the guarantee for the correct operation of the gas spring. The gas spring must be installed in the correct way, that is, when closed, let it move through the center line of the structure, otherwise, the gas spring will often automatically push the door open.
3. The gas spring should not be subjected to tilting or lateral forces during operation. Not for use as a handrail.
4. In order to ensure the reliability of the seal, the surface of the piston rod must not be damaged, and it is strictly forbidden to apply paint and chemicals on the piston rod. It is also not allowed to install the gas spring in the required position and then spray and paint.
5. The gas spring is a high-dangerous product, and it is strictly forbidden to analyze it, fire it, or smash it.
6. The gas spring piston rod is strictly prohibited to rotate to the left. If you need to adjust the direction of the joint, you can only turn it to the right.
7. Ambient temperature of gas spring: -35 ℃ - + 70 ℃. (Specific manufacturing 80 ℃)
8. The connection point of the gas spring installation should be flexible and free of jamming.
9. The size of the gas spring should be reasonable, the size of the force should be appropriate, and the stroke size of the piston rod should have a margin of 8 mm.


Post time: Apr-24-2020